BUILDS BugTracker

buildscc | 06 Jul 2011 | | projects


I want a project issue tracker


We do projects! We need someway to track progress and more importantly to track issues. We are distributed and many times multiple people work on a project. A bugtracker can be perfectly utilized for this purpose.


Up for consideration:



Another option is Trac.

Trac is another great tool. However it is a bit bloated and a hefty install. It has its own wiki which just adds unneeded overhead when we already have one.



Older · View Archive (146)

CNC Drawbot


The original idea was to make a mechanized etch-a-sketch. However, this has no progressed into making a laser-etching device.


4/13/2011 Ordered new steppers from adafruit, as our were not precise enough :(

The College of Engineering has approved funding for the project, we are waiting on the funds to be transferred to acm/sao accounts. Jeff has order a few parts and we are waiting for the transfer to go through before ordering the rest.

03/05/2011 - Software is ~95% complete, steps through and lights a debug LED. most parts ordered. still requires interfacing with the laser, a way to attach the steppers to etch a sketch, and final fabrication of an enclosure.

//code documented -jeff

current code can be found here

graphical QT wrapper for PC_Side scripts can be found here


If you want to join this project, email Jeffrey Crowell (Can Be Found on the BU Directory)


The laser that will most likely be used will be a 650nm, 250mW red diode laser (250mW “Cute” laser from O-Like) that will have the capacity to etch into wood and/or dark plastics. The laser will be focused to get a resolution approximately equal to the resolution of a motorized etch and sketch

CNC Element

Stepper motors are controlled by the arduino (currently jeff’s arduino uno(2010)) Code for this is on the github. These are (eventually going to be) connected to the dials on the etch-a-sketch. Thus we can control the position of the laser. The laser on/off (is going to be) controlled by the arduino setting a transistor to high/low


Here is a copy of the Proposal that Jeff and Samir submitted to the college of Engineering for funding and was approved

Included is a detailed list of parts that we intend to purchase


BUILDS Inventory


There are a few things I would like to inventory. One is computers / servers (this may be separate software as it might be specific to to computers). Not looking for anything to use to do managed administration, just inventory such as physical location and installed components (hd capacity, ram, processor, network interface, video card..)

The other more general inventory would be for things such as general items like tools (screw drivers, saws, soldering irons) and expendables (sand paper, wire, gloves, batteries). I don’t expect to inventory every last item and I am sure it is impossible to keep a perfect inventory in shared spaces but I think it will help multiple people. People have a hard time finding things a lot, even if they are in their proper place, just because they don’t know where that place is. This system could solve that. Secondly the officers like to keep BUILDS stocked especially with the expendable items. But sometimes we don’t know when things get used. If the inventory system had a way to report low / out of items it would be very helpful in keeping items stocked.


BUILDS is in a transition phase at the moment but we are going to use this as a chance to inventory our items as we move to our permanent room at the end of the summer.


  • Want:
    • Good web-based inventory software.
  • Options:


  • Determine inventory software
  • Install software
  • Inventory and add to software


  • John-Nicholas Furst (Project Leader)
  • Jeff Crowell